Operation Manual

3
BASIC OPERATION
3-9
Setting the frequency
D Entering a Band Edge (Continued)
Inserting a Band Edge
After you delete or edit the preset band edges, follow
the steps below to insert a band edge.
L Initially, all band edges are entered. Therefore, you must
rst edit or delete them to enter a new band edge.
L You cannot enter an overlapped frequency or a frequency
that is out of the preset transmit frequency.
1. Open the “User Band Edge” screen.
2. Touch the band edge you want to insert a new
band edge above for 1 second.
(Example: 1: 3.500.000–3.999.999 MHz)
L The new band edge will be inserted above the
selected band edge.
7. Touch [ENT] to save the entered upper band edge
frequency.
• The entered band edge is saved and returns to the
previous screen.
Resetting all band edges to presets
The steps below will reset all the band edges to their
initial settings. All entered settings will be deleted.
1. Open the “User Band Edge” screen.
2. Touch any band edge for 1 second.
3. Touch “Insert.”
4. Enter the lower band edge frequency.
(Example: 1.85)
5. Touch [ENT] to save the entered lower band edge
frequency.
6. Enter the upper band edge frequency. (Example: .95)
“User Band Edge” screen
3. Touch “Default.”
• Displays “Reset All Edges?”
4. Touch [YES].
• All the band edges reset to the initial settings.
“User Band Edge” screen