Operation Manual

4
RECEIVING AND TRANSMITTING
4-14
Split Lock function
The Split Lock function is convenient for changing
only the transmit frequency but not changing the
receive frequency.
1. Turn ON the Split Lock function.
MENU
» SET > Function > SPLIT > SPLIT LOCK
2. Turn ON the Split function.
3. Hold down
SPEECH
for 1 second to turn ON the Dial
Lock function.
4. While holding down
XFC
, set the transmit
frequency.
Displayed
when Dial
Lock is ON.
Setting the transmit lter width
You can select the transmit lter width for the SSB
mode to WIDE (wide), MID (middle) or NAR (narrow).
1. Set the operating mode to USB or LSB.
2. Push
FUNCTION
.
• Opens the FUNCTION screen.
3. Touch [TBW ].
L Touching [TBW] sets the lter width to WIDE, MID or
NAR.
L The transmit lter widths are set to the following
values by default.
• WIDE: 100 Hz to 2900 Hz
• MID: 300 Hz to 2700 Hz
• NAR: 500 Hz to 2500 Hz
You can change the lter width values in the
following settings. (p. 12-3)
MENU
»
SET > Tone Control > TX > SSB > TBW (WIDE)
MENU
»
SET > Tone Control > TX > SSB > TBW (MID)
MENU
»
SET > Tone Control > TX > SSB > TBW (NAR)
Operating CW
D Setting the CW pitch control
You can set the received CW audio pitch and the CW
side tone to suit your preference without changing the
operating frequency.
1. Select the CW mode.
2. Display the Multi-function menu.
3. Touch [CW PITCH].
4. Set the CW pitch to between 300 and 900 Hz
Push
Rotate
Push
FUNCTION screen (SSB mode)