User Guide

54
6
MEMORY OPERATION
■ Frequency transferring
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
• Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
q Select VFO mode with [VFO/MEMO].
w Select the memory channel to be transferred with
[Y]/[Z].
•Memory channel screen is convenient for selecting the
desired channel.
•Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
•“--.---.--” appears if the selected memory channel is a
blank channel. In this case transferring is impossible.
e Push [VFO/MEMO] for 1 sec. to transfer the fre-
quency and operating mode.
•Transferred frequency and operating mode appear on
the frequency readout.
TRANSFERRING EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 16 : 14.018 MHz/CW
or
Push for 1 sec.
Beep
Beep
Beep
SFTSFT
0
FIL2FIL2
USBUSB
qw:pp
TXTX
USBUSB
wq.ewp.pp
14.950.0014.950.00
1
VFOVFO
BWBW
2.4k2.4k
SFTSFT
0
FIL2FIL2
USBUSB
qw:pp
TXTX
CWCW
wq.ewp.pp
14.018.0014.018.00
1616
VFOVFO
BWBW
2.4k2.4k
SFTSFT
0
FIL2FIL2
CWCW
qw:pp
TXTX
CWCW
qr.pqi.pp
14.018.0014.018.00
1616
VFOVFO
BWBW
500500
BPFBPF
ANTANT
1
METERMETER
Po
ANTANT
1
METERMETER
PoPo
ANTANT
1
METERMETER
PoPo
VFO/
MEMO
• Transferring in memory mode
This is useful for transferring frequency and operat-
ing mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
• Displayed frequency and mode are transferred.
•Programmed frequency and mode in the mem-
ory channel are not transferred, and they remain
in the memory channel.
q Select the memory channel to be transferred with
[Y]/[Z] in memory mode.
•And, set the frequency or operating mode if required.
w Push [VFO/MEMO] for 1 sec. to transfer the fre-
quency and operating mode.
•Displayed frequency and operating mode are trans-
ferred to the VFO.
e To return to VFO mode, push [VFO/MEMO] mo-
mentarily.
TRANSFERRING EXAMPLE IN MEMORY MODE
Operating frequency : 14.020 MHz/CW (M-ch 16)
Contents of M-ch 16 : 14.018 MHz/CW
Push for 1 sec.
Programmed contents appear.
Beep
Beep
Beep
VFO/
MEMO
VFO/
MEMO
SFTSFT
0
FIL2FIL2
CWCW
qw:pp
TXTX
USBUSB
qr.pwp.pp
21.320.0021.320.00
VFOVFO
1616
BWBW
500500
SFTSFT
0
FIL2FIL2
CWCW
qw:pp
TXTX
CWCW
qr.pwp.pp
14.018.0014.018.00
1616
VFOVFO
BWBW
500500
SFTSFT
0
FIL2FIL2
CWCW
qw:pp
TXTX
CWCW
qr.pwp.pp
14.020.0014.020.00
VFOVFO
1616
BWBW
500500
BPFBPF
BPFBPF
BPFBPF
ANTANT
1
METERMETER
PoPo
ANTANT
1
METERMETER
PoPo
ANTANT
1
METERMETER
PoPo
IC-756PROII.qxd 02.1.8 15:51 Page 54