Operation Manual

!1 BREAK-IN DELAY CONTROL
[BK-IN DELAY] (p. 85)
Adjusts the transmit-to-receive switching delay
time for CW semi-break-in operations.
Push
Short delay for
high speed
keying (2 dots)
Long delay for
slow speed
keying (13 dots)
!2 ELECTRONIC CW KEYER SPEED CONTROL
[KEY SPEED] (p. 85)
Adjusts keying speed for the internal electronic CW
keyer from 6 wpm (min.) to 48 wpm (max.).
Push
Slow
(6 wpm)
Fast
(48 wpm)
!3 MULTI-FUNCTION SWITCHES
Push to select the functions indicated in the LCD
display to the right of these switches.
• Functions vary depending on the operating condition.
MF1 (MULTI-FUNCTION 1 SWITCH)
ANT SWITCH (ANT)
 ➥ Selects the antenna connector be-
tween ANT1 and ANT2 when pushed.
(p. 112)
 ➥ Turns the [RX ANT] (receive antenna)
ON and OFF when pushed and held
for 1 sec.
• When the receive antenna is activated,
the antenna connected to the [ANT1] or
[ANT2]
is used for transmitting only.
When a transverter is in use, this [ANT]
does not function and ‘TRV’ appears.
MF2 (MULTI-FUNCTION 2 SWITCH)
METER SWITCH (METER) (p. 34)
 ➥ Selects RF power (Po), SWR, ALC,
COMP, Vd or Id metering during trans-
mit.
 ➥ Switches the multi-function digital
meter ON and OFF when pushed and
held for 1 sec.
■ F
ront panel (continued)
TWIN
-
PBT
RIT/ TX
Ӡ
NOTCH CW PITCH
VOICE MEMORY
BAL NR
AF RF/SQL
MIC GAIN RF POWER BK
-
IN DELAY KEY SPEED
TIMER
PHONES
ELEC
-
KEY
MIC
AUTO
TUNE
M.SCOPE
GENE F
-
INP
1.8 3.5
1 2
14
5
18
6
7
3
24
8
28
9
50
0 ENT
4
7
10
21
CHANGE
TS
XFC
SPLIT
DUAL
WATCH
MAIN
/ SUB
VFO/MEMO
MP
-
W
MW
MP
-
R
F
-
6 F
-
5 F
-
4 F
-
3 F
-
2 F
-
1
NRNB
PBT
-
CLR APF/TPF NOTCH
POWER
RIT CLEAR TX
Ӡ
SPEECH
LOCK
FILTER
REC PLAY
EXIT / SET
SSB CW RTTY / PSK AM/FM
MONITOR
TRANSMIT
TUNER
HF/50MHz TRANSCEIVER
LOCKTX RX SPLIT
!1 !2
!3
3
1
PANEL DESCRIPTION