Operation Manual

■ Recording a message for transmit
To transmit a message using the voice recorder,
record the desired message in advance as described
below.
The IC-7600 has digital voice memories for transmis-
sion, up to 4 messages and a total message length of
up to 99 sec. can be recorded.
D Recording
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [VOICE] (F-2) to call up the voice recorder
screen.
e Push [EXIT/SET] to select voice recorder menu.
r Push [MIC REC] (F-2) to select the voice mic.
record screen.
t Push [Y] (F-1) or [Z] (F-2) to select the desired
message.
y While speaking into the microphone with your nor-
mal voice level, adjust the [MIC GAIN] control so
that the [MIC-REC LEVEL] indicator reads within
100%.
u Push and hold [REC] (F-4) for 1 sec. to start
recording.
• “ ” indicator appears.
• Speak into the microphone without pushing [PTT].
•
Previously recorded contents are cleared.
• Audio output from the internal speaker is automatically
muted.
i Push [REC] (F-4) momentarily to stop recording.
• The recording is terminated automatically when the
remaining time becomes 0 sec.
o Push [EXIT/SET] twice to exit the voice recorder
screen.
D Confirming a message for transmit
q Perform the steps q to r as “D Recording”
above.
w Push [Y] (F-1) or [Z] (F-2) to select the desired
message.
e Push [PLAY] (F-3) to playback the recorded con-
tents.
• “ ” indicator appears.
• Push and hold [CLR] (F-6) for 1 sec. to erase the con-
tents.
r Push [PLAY] (F-3) again to stop playback.
• Playback is terminated automatically when all of the
recorded contents in the message are played.
t Push [EXIT/SET] twice to exit the voice recorder
screen.
F-2
F-4
F-1
REC
EXIT/SET
VOICE
MIC REC
Appears
Adjust [MIC GAIN] control so that this
indicator reads within 100%.
F-2 F-3F-1
PLAY
EXIT/SET
F-6
CLR
94
5
VOICE RECORDER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21