Operation Manual

■ Setting sleep timer
F-2 F-4
F-6
EXIT/SET
Main dial
TIMER
SET
SLEEP
/
TIME CLR
/
TIMER
POWER
• Sleep timer set condition
The sleep timer turns the transceiver power OFF
automatically after passing the set period. The timer
can be set to 5–120 min. in 5 min. steps.
The sleep timer function counts the ‘minute’ units,
and does not count the ‘second’ units. For exam-
ple, when the sleep timer is started at 12:00 59,
First one minute past for just 1 sec. The maximum
error is therefore 59 sec. This is normal, not a mal-
function.
q Push [EXIT/SET] several times to close multi-func-
tion screen, if necessary.
w Push [SET] (F-6) to select set mode menu screen.
e Push [TIME] (F-4) to select time set mode.
r Push [TIMER] (F-2) to select timer set mode.
t Push [SLEEP] (F-6) to select the sleep timer set
condition.
• “– – –” blinks.
y Set the desired time period using the main dial.
• “TIMER–set Push [SET]” blinks.
• Push [CLR] (F-4) to select “– – –” to cancel the sett
ing.
u Push [SET] (F-6) to set the time.
• Push [EXIT/SET] to cancel the setting.
• The timer indicator appears.
i Push [EXIT/SET] to exit timer set screen.
o The transceiver emits 10 beeps and turns OFF
after the sleep timer period elapses.
• The timer indicator blinks while beeping.
• Push [POWER]
momentarily to cancel the sleep timer,
if desired.
■ Timer operation
TIMER
POWER
q Preset the daily timer as described on previously to
turn the timer function ON.
• The timer indicator appears.
w Push and hold [POWER] for 1 sec. to turn the
power OFF.
• The indicator on this switch lights red when the timer
function is ON.
e When the set time arrives, the power is automati-
cally turned ON.
r The transceiver emits 10 beeps and turns OFF
after the power-off period elapses.
• The timer indicator blinks while beeping.
• Push [POWER]
momentarily to turn the timer function
OFF, if desired.
Timer action in the timer set screen must be
selected ON to enable timer operation, described
in page 116 step y.
117
9
CLOCK AND TIMERS
Appears