Operation Manual

■ Level set mode
SSB RX HPF/LPF – – – – – – –
Sets the high-pass filter (100 to 2000 Hz) and low-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in SSB mode. (default: OFF)
NOTE: When this setting is active, below 2 items
will be reset to default value, ‘0.’
SSB RX Tone (Bass) 0
Sets the bass level of the receive audio tone in SSB
mode from –5 to +5. (default: 0)
SSB RX Tone (Treble) 0
Sets the treble level of the receive audio tone in
SSB mode from –5 to +5. (default: 0)
AM RX HPF/LPF – – – – – – –
Sets the high-pass filter (100 to 2000 Hz) and low-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in AM mode. (default: OFF)
NOTE: When this setting is active, below 2 items
will be reset to default value, ‘0.’
AM RX Tone (Bass) 0
Sets the bass level of the receive audio tone in AM
mode from –5 to +5. (default: 0)
AM RX Tone (Treble) 0
Sets the treble level of the receive audio tone in AM
mode from –5 to +5. (default: 0)
FM RX HPF/LPF – – – – – – –
Sets the high-pass filter (100 to 2000 Hz) and low-
pass filter (500 to 2400 Hz) of the receive audio in
100 Hz steps in FM mode. (default: OFF)
NOTE: When this setting is active, below 2 items
will be reset to default value, ‘0.’
FM RX Tone (Bass) 0
Sets the bass level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
FM RX Tone (Treble) 0
Sets the treble level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
☞ Continues to the next page.
120
10
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21