Operation Manual
@1 MODE SWITCHES
Selects the desired mode. (p. 32)
• Announces the selected mode via the speech synthe-
sizer. (p. 35)
[SSB]
➥ Selects USB and LSB modes alternately when
pushed.
➥ Selects SSB data mode (USB-D, LSB-D) when
pushed and held for 1 sec. in SSB mode.
• In SSB data mode, push to return to SSB mode.
➥ Switches D1, D2 and D3 when pushed and held
for 1 sec. in SSB data mode.
[CW]
Selects CW and CW-R (CW reverse) modes alter-
nately when pushed.
[RTTY/PSK]
➥
Selects RTTY and PSK modes alternately when
pushed.
➥ Switches RTTY and RTTY-R (RTTY reverse)
mode when pushed and held for 1 sec. in RTTY
mode.
➥ Switches PSK and PSK-R (PSK reverse) mode
when pushed and held for 1 sec. in PSK mode.
[AM/FM]
➥ Selects AM and FM modes alter
nately.
➥ Selects AM or FM data mode (AM-D/FM-D)
when pushed and held for 1 sec. in AM or FM
mode, respectively.
• In AM or FM data mode, push to return to AM or
FM mode, respectively.
➥ Switches D1, D2 and D3 when pushed and held
for 1 sec. in AM or FM data mode.
@2 FIL
TER SWITCH [FILTER] (p. 76)
➥ Push to select one of 3 IF filter settings.
➥ Push and hold for 1 sec. to display the filter set
screen.
@3 EXIT/SET SWITCH [EXIT/SET]
➥
Push to exit, or return to the previous screen in-
dication during spectrum scope, memory, scan
or set mode screen display.
➥ Push and hold for 1 sec. to display the set mode
menu screen.
@4
VOICE MEMORY RECORD SWITCH [REC]
(p. 91)
➥ Push to record the previous received signal for
the preset time period.
• The preset time period can be set in voice set mode.
(p. 97)
➥ Push and hold for 1 sec. to record the received
signal until the recording is cancelled.
• Push this switch momentarily to stop recording.
• The memory records the latest 30 sec. of audio.
@5 VOICE MEMORY PLAYBACK SWITCH [PLAY]
(p. 92)
➥ Push to playback the previously recorded audio
for the preset time period.
➥ Push and hold for 1 sec. to playback all of the
previously recorded audio.
@6
AUTOMATIC TUNING SWITCH [AUTO TUNE]
(p. 83)
Turns the automatic tuning function ON and OFF in
CW and AM modes.
IMPORTANT!
When receiving a weak signal, or receiving a sig-
nal with interference, the automatic tuning func-
tion may tune the receiver to an undesired signal.
@7 MAIN DIAL
Changes the displayed frequency, selects set
mode setting, etc.
@8 SPEECH/LOCK SWITCH [SPEECH/LOCK]
➥
Push to announce the S-meter indication, the
displayed frequency and the operating mode.
(p. 35)
• The parameters to be announced can be selected in
the others set mode. (p. 131)
➥ Push and hold for 1 sec. to turn the dial lock
function ON and OFF. (p. 82)
• The dial lock function electronically locks the main
dial.
• The lock indicator lights while the dial lock function
is activated.
NOTE: The [SPEECH/LOCK] switch operation
to activate the voice synthesizer or the dial lock
functions can be replaced in others set mode.
(p. 131)
@9 RIT/∂TX CONTROL [RIT/∂TX] (pgs. 73, 87)
Shifts the receive and/or transmit frequency with-
out changing the transmit and/or receive frequency
shown on the main VFO while the RIT and/or ∂TX
functions are/is ON.
• Rotate the control clockwise to increase the frequency,
or rotate the control counterclockwise to decrease the
frequency. The RIT or ∂TX funct
ions must be ON.
• The shift frequency range is ±9.999 kHz in 1 Hz steps
(or ±9.99 kHz in 10 Hz steps).
Low shift
High shift
6
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21