Operation Manual

■ Level set mode (Continued)
Beep Level 50
%
Sets the beep output level from 0% to 100% in 1%
steps. (default: 50%)
Beep Level Limit ON
Turns the beep tone output level limiting capabil-
ity ON and OFF for the confirmation and band edge
beep tones. (default: ON)
When this item is set to ON, the beep tones are
linked to the [AF] control until rotation of the [AF]
control reaches to the specified level—further rota-
t
ion will not increase the volume of the beep tones.
• OFF : Beep level is linked to the [AF] control.
• ON : Beep level is limited with the [AF] control.
123
10
SET MODE