Operation Manual

■ Firmware update (Continued)

!3 After the firmware loading is completed, the trans-

ceiver starts the update automatically and the dia-

log at right is displayed.

RWARNING: NEVER turn the IC-7600 power OFF

at this stage.

The transceiver firmware will be corrupted.

!4 When the dialog disappears, the precaution at left

is displayed.

!5 Read the precaution carefully, and then push

[OK] (F-5).

• Return to USB-Memory set menu.

!6 Push [POWER] to turn the IC-7600 power OFF,

then ON again.

!7 Depending on the update, one or two dialog boxes

as at right appear in sequence.

RWARNING: NEVER turn the IC-7600 power OFF

at this stage.

The transceiver firmware will be corrupted.

!8 After the dialog disappears, the firmware updat-

ing is completed and normal operation screen

appears.

165

UPDATING THE FIRMWARE