Operation Manual

o RTTY TUNING INDICATOR
Shows the tuning condition in RTTY mode.
!0 MODE INDICA
TOR
Shows the selected mode.
!1 FREQ
UENCY READOUTS
Shows the operating frequency.
• Gray characters are used for not-selected readout.
!2 MEMORY CHANNEL READOUTS
➥
Shows the selected memory channel contents
in VFO mode.
➥ Shows the VFO contents in memory mode.
!3 SELECT MEMORY CHANNEL INDICATOR (p. 109)
Indicates the displayed memory channel is set as
a select memory channel.
!4 MUL
TI-FUNCTION SCREEN
Shows the screens for the multi-function digital
meter, spectrum scope, voice recorder, memory
list, scan, memory keyer, RTTY decoder, PSK de-
coder
, IF filter selection or set modes, etc.
!5 VFO/MEMOR
Y CHANNEL INDICATOR (p. 26)
Indicates the VFO mode or selected memory chan-
nel number.
!6 LCD FUNCTION SWITCH GUIDE
Indicates the function of the LCD function switches
([F-1] to [F-6]).
!7 MUL
TI-FUNCTION SWITCH GUIDE
Indicates the function of the multi-function switches.
!8 TX INDICATOR
➥
“ ” appears while transmitting. (p. 36)
➥ Indicates the frequency readout for transmit.
• “ ” appears during an operating frequency is
not in an amateur band. When the band edge warn-
in
g beep is set to “OFF” (p. 31), “
” does not
appear.
• Appears on the sub band readout when the split
function is turned ON.
!9 RIT INDICATOR
“
” appears when RIT function is in use.
@0 ∂TX INDICATOR
“
” appears when ∂TX function is in use.
@1 RIT/∂TX SHIFT FREQUENCY INDICATOR
Shows the shift frequency for the RIT or ∂TX func-
t
ion.
@2 NO
TCH INDICATOR (p. 83)
➥ “
” appears when the manual notch function
is in use. This function is available in SSB, CW,
RTTY, PSK and AM modes.
➥ “ ” appears when the auto notch function is
in use. This function is available in SSB, AM
and FM modes.
@3 APF/TPF INDICA
TOR
➥ “ ” appears when the audio peak filter func-
tion is in use. This function is available in CW
mode. (p. 39)
➥ “ ” appears when the twin peak filter func-
tion is in use. This function is available in RTTY
mode. (p. 47)
@4 DU
AL WATCH INDICATOR
“ ” appears when the dualwatch function
is in use.
14
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21