Operation Manual

■ Frequency setting
The transceiver has several tuning methods for con-
venient frequency tuning.
D Tuning with the main dial
q Push the desired band key on the keypad 1–3
times.
• 3 different frequencies can be selected on each band
with the band key. (See previous page “Using the band
stacking registers.”)
w Rotate the main dial to set the desired frequency.
If the dial lock function is activated, the lock indica-
tor lights, and the main dial does not function.
In this case, push and hold [SPEECH/LOCK] for
1 sec. to deactivate the lock function. (p. 82)
When “LOCK/SPEECH” is selected in “[SPEECH/
LOCK] Switch” item in others set mode, pushing
[SPEECH/LOCK] deactivates the lock function.
(see p. 131 for details)
D Direct frequency entry with the keypad
The transceiver has a keypad for direct frequency
entry as described below.
q Push [F-INP ENT].
• “ ” indicator appears.
w Input the desired frequency.
• Push [GENE •] to input “. (decimal point)” between the
MHz units and kHz units.
e Push [F-INP ENT] to set the input frequency.
• To cancel the input, push [EXIT/SET].
Main dial
Band keys
Keypad
1.8
1
3.5
2
F-INP
ENT
F-INP
ENT
10
4
GEN
•
50
0
14
5
1.8
1
21
7
F-INP
ENT
F-INP
ENT
24
8
GEN
•
50
0
3.5
2
14
5
50
0
F-INP
ENT
50
0
F-INP
ENT
GEN
•
21
7
18
6
10
4
F-INP
ENT
F-INP
ENT
GEN
•
3.5
2
14
5
1.8
1
F-INP
ENT
F-INP
ENT
GEN
•
14
5
F-INP
ENT
F-INP
ENT
21
7
[EXAMPLE]
14.025 MHz
18.0725 MHz
706 kHz
5.100 MHz
7.000 MHz
21.280 MHz � 21.245 MHz
28
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21