Operation Manual

D Selecting 1 Hz step
A minimum tuning step of 1 Hz can be used for fine
tuning.
q Push [TS] to turn the quick tuning function OFF.
w Push and hold [TS] for 1 sec. to turn the 1 Hz tun-
ing step ON and OFF.
NOTE:
• RIT and/or ∂TX also functions in 1 Hz tuning step
when used.
• The frequency is changed in 50 Hz step when the
[UP]/[DN] switches of the microphone are used
for the frequency setting (when the programma-
ble tuning step is not selected.)
D Auto tuning step function
When rotating the main dial rapidly, the tuning speed
accelerates automatically as selected.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [SET] (F-6) to select set mode menu screen.
• Pushing and holding [EXIT/SET] for 1 sec. also selects
set mode menu screen.
e Push [OTHERS] (F-5) to enter others set mode.
r Push [Y] (F-1) or [Z] (F-2) to select “MAIN DIAL
Auto TS.”
t Rotate the main dial to select the desired condition
from HIGH, LOW and OFF.
• HIGH : Approx. 5 times faster when the tun-
ing step is set to 1 kHz or smaller steps;
approx. 2 times faster when the tuning
step is set to 5 kHz or larger steps.
• LOW : Approx. 2 times faster
• OFF : Auto tuning step is turned OFF.
y Push [EXIT/SET] to exit the set mode.
D
1
⁄4 tuning step function
When operating in SSB data, CW, RTTY or PSK, the
1
⁄4 tuning function is available. Dial rotation is reduced
to
1
⁄4 of normal speed when the
1
⁄4 tuning function is
ON for finer tuning control.
➥ Push [1/4] (MF7) to toggle the
1
⁄4 tuning function
ON and OFF.
• “ ” appears when the
1
⁄4 tuning function is ON.
TS
Main dial
F-1 F-2
F-6
EXIT/SET
SET
F-5
OTHERS
1 ⁄ 4
¼ tuning step OFF ¼ tuning step ON
1 Hz step indicator
HIGH (default)
30
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21