Operation Manual

■ Recording a received audio
Up to 20 receive voice memories are available in the
IC-7600. A total of 209 sec. of audio can be recorded
in receive messages. However, the maximum record-
able length of a single message is 30 sec.
This voice recorder records not only the received
audio, but also the information such as set operat-
ing frequency, mode, and the recording time for your
future reference.
D Basic recording
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Select the desired mode.
e Push [VOICE] (F-2) to call up the voice recorder
screen.
• Previously selected screen, TX or RX memory, is dis-
played. If the TX memory channel (T1–T4) appears,
push [T/R] (F-6) to select RX memory channel.
r Push and hold [REC] for 1 sec. to start recording.
• The operating frequency, mode and current time are
programmed as the memory names automatically.
t Push [REC] momentarily to stop recording.
IMPORTANT!
Push [REC] to stop recording before, or when
30 sec. has elapsed from the start of recording.
The voice recorder memory records 30 sec. (max.)
of audio before [REC] is pushed.
For example, when recording 40 sec. of audio, the
first 10 sec. audio will be over-written with the last
10 sec., so that the total of audio recorded is only
30 sec.
When you record the 21st audio message, or
when the total audio length exceeds 209 sec., the
oldest recorded audio is automatically erased to
make room for the new audio.
y Push [EXIT/SET] twice to exit the voice recorder
screen.
NOTE: When transmit (or [PTT] is pushed) while
recording, no audio will be recorded.
D One-touch recording
To record the received signal immediately, one-touch
voice recording is available.
➥ Push [REC] momentarily to store the previous
15 sec. audio.
• The recordable time period can be set in voice set
mode. (p. 97)
F-2 F-6
EXIT/SET
VOICE
T/R
REC
The remaining time for recording
is indicated.
REC
91
5
VOICE RECORDER FUNCTIONS