Operation Manual

5
SCOPE OPERATION
5-3
Audio scope screen (Continue)
D AUDIO SCOPE SET screen
This screen is used to set the FFT scope waveform
type, color, Waterfall display and oscilloscope
waveform color.
1. Display the AUDIO SCOPE screen.
MENU
» AUDIO
2. Touch [SET].
3. Touch to select the item to set.
(Example: “FFT Scope Waveform Type”)
4. Touch the option to set.
L See the right column for details on the setting items
and their options.
5. To close the AUDIO SCOPE SET screen, push
EXIT
.
TIP: You can set each item to its default by touching
the item for 1 second, and then touching “Default” on
the QUICK MENU.
FFT Scope Waveform Type (Default: Fill)
Select the type of waveform for the FFT scope.
• Line: Only the waveform outline is drawn.
• Fill: The full waveform is drawn in color.
FFT Scope Waveform Color
(Default: (R) 51 (G) 153 (B) 255)
Set the waveform color for the FFT scope.
L Touch and select the R (Red), G (Green) or B (Blue)
scale, and then rotate
MULTI
to adjust the ratio
from 0 to 255.
L The color is displayed in the box above the RGB
scale.
FFT Scope Waterfall Display (Default: ON)
Turn the Waterfall display ON or OFF.
• OFF: Turns OFF the Waterfall display.
• ON: Turns ON the Waterfall display.
Oscilloscope Waveform Color
(Default: (R) 0 (G) 255 (B) 0)
Set the waveform color for the Oscilloscope.
L Touch and select the R (Red), G (Green) or B (Blue)
scale, and then rotate
MULTI
to adjust the ratio
from 0 to 255.
L The color is displayed in the box above the RGB
scale.