Operation Manual

8
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
8-9
Time Set
MENU
» SET > Time Set > Date/Time
Date
Sets the date (Year/Month/Day).
(The day of the week is automatically set.)
Time
Sets the current time.
(The time is displayed in the 24 hour format.)
<<NTP TIME SYNC>>
Synchronizes the internal clock with the time
management server.
L To use this function, you need an Internet connection
and default gateway settings.
NTP Function (Default: ON)
Automatically obtains the current time from the NTP
server.
NTP Server Address (Default: time.nist.gov)
Sets NTP server address.
MENU
» SET > Time Set
UTC Offset (Default: ± 0:00)
Sets the UTC offset time.
CLOCK2 Function (Default: ON)
Displays the second clock on the screen.
CLOCK2 UTC Offset (Default: ± 0:00)
Sets the time offset for Clock 2.
CLOCK2 Name (Default: UTC)
Sets the name of up to 3 characters for Clock 2.
NOTE: The backup battery for the internal clock
The IC-7610 has a rechargeable Lithium battery to backup
the internal clock. If you connect the transceiver to a
power source, the battery is charged and it keeps the
correct clock setting. However, if you do not connect the
transceiver to a power source for a long period of time, the
battery will discharge. In that case, the transceiver resets
the internal clock.
If you do not use the transceiver for a long period of time,
we recommend that you connect the transceiver to a
power source at least once a month. The charging period
is two days whether the transceiver’s power is ON or OFF.
Screen Saver (Default: 60min)
Sets the Screen Saver function.
This function activates and automatically turns OFF
the screen when no operation is performed for the
preset period of time.
External Display (Default: OFF)
Select “ON” when using an external display.
External Display Resolution (Default: 800x480)
Select the screen resolution of the external display.
Opening Message (Default: ON)
Selects whether or not to display the opening
message at power ON.
My Call (Default: —)
Displays text as the opening message, up to 10
characters.
Power ON Check (Default: ON)
Selects whether or not to display the RF Power level
at power ON.
Display Language (Default: English)
Sets the display language.
SD Card
MENU
» SET > SD Card
Load Setting
Selects the saved data le to load.
Save Setting
Saves the setting data onto an SD card.
SD Card Info
Displays the SD card capacity and the time remaining
for voice recording.
Screen Capture View
Displays the selected screen capture.
Firmware Update
Displays the Firmware Update mode.