Operation Manual

8
SET MODE
8-10
USB Flash Drive
MENU
» SET > USB Flash Drive
Load Setting
Selects the saved data le to load.
Save Setting
Saves the setting data onto a USB ash drive.
USB Flash Drive Info
Displays the USB ash drive capacity and the time
remaining for voice recording.
Screen Capture View
Displays the selected screen capture.
Firmware Update
Displays the Firmware Update mode.
Format
Formats the USB ash drive.
If you use a brand new USB ash drive, be sure to
format it in the transceiver.
Unmount
Unmounts the USB ash drive.
Before you remove a ash drive when the transceiver
is ON, be sure to electrically unmount it. Otherwise
the data may be corrupted or deleted.
Format
Formats the SD card.
If you use a brand new SD card, be sure to format it in
the transceiver.
Unmount
Unmounts the SD card.
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it. Otherwise the data
may be corrupted or deleted.
Others
MENU
» SET > Others > Information
Version
Displays the transceiver rmware’s version number.
MENU
» SET > Others
Touch Screen Calibration
Touch to adjust the touch screen.
LSee the Advanced Manual for details.
MENU
» SET > Others > Reset
Partial Reset
Resets operating settings to their default values (VFO
frequency, VFO settings, menu contents) without
clearing the items below:
• Memory channel contents
• MY Call
• Memory Keyer
• RTTY memory
• User Band Edge
• REF Adjust
• Fixed Edges
LSee “Resetting” (p.10-1) for details.
All Reset
Clears all data and returns all settings to their factory
defaults.
Memory channel contents, lter setting and so on
will all be cleared, so you will need to rewrite your
operating settings.
LSee “Resetting” (p. 10-1) for details.
MENU
» SET > Others > Emergency
Emergency
Enters the Emergency mode by touching “Tuner.”
LSee page 7-4 for details.
SD Card (Continued)