Operation Manual

130
9
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D GPS alarm setting
A GPS alarm can sound when a target position comes
into the alarm area. This function can be set to the
caller station, all GPS Memory channels, a specified
Memory bank or a specified Memory channel.
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [GPM](F-2) to display the “GPM” screen (GPS
Memory).
e Rotate [MAIN DIAL] to select the desired memory
group, or memory channel.
 •“RX,”“ALL,”amemorybankormemorychannelcanbe
selected.
 Youcanselectamemorychannelafterpushing[LIST]
(F-1) when “ALL” or a memory bank is selected.
r Push [ALM](F-5) to turn ON the Alarm function.
 •Push[ALM](F-5)againtoturnOFFtheAlarmfunction.
t Push [MENU] to return to the “GPS” screen.
✔ For your information!
•When“RX”ormemorychannelisselectedinstepe,
the alarm functions depend on “Alarm Area2” setting
in the GPS Set mode. (p. 133)
•When“ALL”oramemorybankisselectedinstepe,
the alarm functions depend on “Alarm Area1” setting
in the GPS Set mode. (p. 133)
[CALL/GPS] [MAIN DIAL][MENU]
[GPM] [ALM]
GPMPOS MSG SET
GPS
Push
DUPAGC AFC TON SCP
M1
Hold down
ALM
GPM
≈
RX
Rotate [MAIN DIAL]
LIST CLR ALM
GPM
≈
ALL
Push
LIST CLR ALM
GPM
≈
ALL
Appear when the Alarm function is ON.