Operation Manual

36
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
(Frequency band: HF/50 MHz)
q Hold down [BAND](MAIN/SUB) for 1 second one
or more times until a HF/50 MHz frequency band is
displayed.
wPushabandkey([1.81]to[500]or[GENE•]).
 •Thepreviouslyselectedfrequencyandoperatingmode
are called up as the first band stacking register of that
frequency band.
e Select a frequency and an operating mode, and
then push the band key.
 •Theselectedfrequencyandmodearememorizedas
that frequency band’s first band stacking register.
r Select another frequency and operating mode, and
then push the band key.
 •Theselectedfrequencyandmodearememorizedas
that frequency band’s second band stacking register.
t Select another frequency and operating mode, and
then push the band key.
 •Theselectedfrequencyandmodearememorizedas
that frequency band’s third band stacking register.
y The first band stacking register set in step e, is
called up.
 •Whenthefrequencybandkeyispushed,thememo-
rized triple band stacking registers are sequentially
called up.
(Frequency band: 144/430/1200 MHz)
q Hold down [BAND](MAIN/SUB) for 1 second one or
more times until a 144 MHz, 430 MHz or 1200 MHz
frequency band is displayed.
 •Thepreviouslyselectedfrequencyandan operating
mode are called up as the first band stacking register of
that frequency band.
w Select a frequency and an operating mode, and
thenpush[GENE•].
 •Theselectedfrequencyandmodearememorizedas
that frequency band’s first band stacking register.
e Select another frequency and operating mode, and
thenpush[GENE•].
 •Theselectedfrequencyandmodearememorizedas
that frequency band’s second band stacking register.
r Select another frequency and operating mode, and
thenpush[GENE•].
 •Theselectedfrequencyandmodearememorizedas
that frequency band’s third band stacking register.
t The first band stacking register set in step w, is
called up.
 •When[GENE•]ispushed,thememorisedtripleband
stacking registers are sequentially called up.
The optional UX-9100 is required for 1200 MHz frequency
band operation.
AGC DUP COMP TBW SCP
M1
AGC DUP COMP TBW SCP
M1
AGC DUP COMP TBW SCP
M1
AGC DUP COMP TBW SCP
M1
Hold down
Push
Push
Push
AGC DUP COMP TBW SCP
M1
Hold down
AGC DUP COMP TBW SCP
M1
AGC DUP COMP TBW SCP
M1
AGC DUP COMP TBWSCP
M1
[Example]: 14 MHz frequency band
[Example]: 430 MHz frequency band
Push
Push
Push