User Guide

18
9
OPC-871 HEADSET ADAPTER/OTHER OPTIONS
■ OPC-871 Headset adapter
When using an optional headset, such as those from the
David Clark Co. via the adapter
, the transceiver outputs your
transmitted voice to the headset for monitoring. (pgs. 5, 10)
DD
Installation
The optional OPC-871 HEADSET ADAPTER install as
follows.
q Turns the power OFF, then disconnect the DC power
cable.
wUnscrew the 4 screws, then remove the bottom cover. (Fig. 1)
e Insert the connector as shown below. (Fig. 2)
r Mount the phone plug attachment together with the mo-
bile mounting bracket with 2 supplied screws. (Fig. 3)
HEADSET
(Must be purchased
separately.)
PTT switch
Use a PTT switch with a 3.5
mm diameter plug, if re-
quired.
D Connection
Fig. 1
IC-A110EURO-2 02.3.12 2:00 PM Page u (1,1)