User Guide

ManualsBrandsIcom ManualsOtherIC-A110EURO

SCAN OPERATION

■ Scan operation

q Push [V/M] to select memory mode or VFO mode, if nec-

essary.

•“ ” appears on the memory mode.

w Make sure the squelch level is set to the threshold point.

• Set a squelch level (01 to 25) where the noise is muted.

e Push [SCAN] to start scan.

• To change the scan direction, turn [DIAL].

•“SCAN (or P SCAN)“ ﬂashes while scanning.

r Push [SCAN] again to stop the scan.

NOTE: Normal scan or Priority scan is pre-programmed

by cloning. Please ask your dealer or system operator for

details.

ï NORMAL SCAN

•Memory lock scan

Repeatedly scans memory

channels except skip (lockout)

channels.

• VFO scan

Repeatedly scans all

frequencies over the entire

band. Scan step is minimum

channel spacing. (e.g. 25 kHz or

8.33 kHz)

ï PRIORITY SCAN

•Priority memory scan

While scanning on a memory

mode, priority watch checks

for a signal on the selected

priority channel every 250 m

sec except lockout channel.

Mch 2*

Mch 1

Mch 3

Mch 20

250 msec.

*: Lockout ch

SKIP

Scan

Jump

Start

highest

frequency

lowest