Operation Manual

n Programming a memory channel
Program often-used frequencies with the following instruc-
tions.
D For IC-A14
q Push [CLR] to select the frequency mode, if necessary.
w Set the desired frequency. (p. 8)
• Push [FUNC]
,
then push [WX](7) to select a weather chan-
nel mode, and then select the desired weather channel using
[Y]/[Z] or keypad if desired. (p. 23)
e Push [FUNC] then push [MW](MR) to enter the select
memory write mode.
• Memory mode indicator blinks.
r Push [Y]/[Z] to select the desired memory channel
number.
• Push [FUNC], then push [BANK](3) to enter bank selection
mode, and push [Y]/[Z] or appropriate digit key ([0]–[9]), then
push [ENT] to select the BANK number if desired.
t Push [ENT] to program the set condition into the memory
channel and return to the frequency mode.
13
4
MEMORY OPERATION
• EXAMPLE: Programming WX-05 into memory channel 9
in memory BANK 3.
Blinks when select memory
write mode is selected.
No frequency is displayed when a blank channel is
selected.
Push
Push then
Push then
Push then
Push or ,
or, push
Push or ,
or, push
Push then
*Shows briefly.
Push to complete the programmig.
*Shows briefly.