Operation Manual

15
4
MEMORY OPERATION
n Memory names
The memory channel can display an 8-character name in-
stead of the programmed frequency.
D Programming memory names
q Set the desired frequency in frequency mode. (p. 8)
w Enter the select memory write mode.
• For IC-A14; push [FUNC] then push [MW](MR).
• For IC-A14S; push and hold [MR] for 1 sec.
e Select the desired memory channel to be programmed
with [Y]/[Z] (or keypad and [ENT]; for IC-A14 only).
r Push [MR] momentarily to enter the memory name pro-
gramming mode.
• “-- -- -- -- -- -- -- --” appears and 1st digit blinks.
• Available characters
For IC-A14
t Push the appropriate digit key several times to select the
desired character as listed at right.
• To move the cursor forwards or backwards, use [Y]/[Z].
• The cursor moves forwards automatically when a different key
is pushed.
• To erase a character, overwrite with a space (displayed as “_”).
y Push [ENT] to program the name and frequency at the
same time.
• Return to the frequency indication.
• When no name is programmed, the display shows the pro-
grammed frequency.
• To clear the entered memory names, push [CLR] before push-
ing [ENT].
For IC-A14S
t Push [Y]/[Z] several times to select the desired character.
• To move the cursor forwards, use [MR].
• To erase a character, overwrite with a space (displayed as “_”).
y Push and hold [MR] for 1 sec. to program the name and
frequency at the same time.
• Return to the frequency indication.
• When no name is programmed, the display shows the pro-
grammed frequency.
• To clear the entered memory names, push [CLR] before push-
ing and holding [MR] for 1 sec.
KEY CHARACTER KEY CHARACTER
[1] 1, Q, Z [6] 6, M, N, O,
[2] 2, A, B, C [7] 7, P, R, S
[3] 3, D, E, F [8] 8, T, U, V
[4] 4, G, H, I [9] 9, W, X, Y
[5] 5, J, K, L [0] 0, _ (space), –