User Guide

33
12
QUICK REFERENCE
q w e
Push [MR
MW
] to enter memory
mode.
Select the desired channel to be
transferred.
Push , then push [MR
MW
].
q w
Push [MR
MW
] to select the mem-
ory mode.
Push , then [9
TAG
] to turn the
channel “TAG ” ON and OFF.
Push , then push [7 ] to
turn the key lock function ON.
‘ ’ appears on the display.
Push , then push [7 ] to
turn the keylock function OFF.
q w
*WX CH available U.S.A. version only.
Push [MR
MW
] to enter the mem-
ory CH mode.
Push , then push [0
BANK
] to
enter the BANK selection mode.
Push keypad (or rotate [DIAL]) to
select the desired BANK number
(BANK 0 to 9).
Push , then push [0
BANK
] (or
push [ENT
WX
]) to set the BANK
number and exit the BANK selec-
tion mode.
q w e
Push [CLR
DEL
] to exit the
BANK selection mode.
BANK number and memory CH
number disappears as frequency
mode is automatically selected
and the memory contents are
transferred.
q
w e r t
Push [CLR
DEL
] to select the
frequency mode or push ,
then push [ENT
WX
] to select
WX CH* mode.
Select the desired frequency or
WX CH.*
Push , then push [MR
MW
]
to enter memory programming
mode.
Rotate [DIAL] (or push keypad)
to select a desired memory CH
number (0 to 19).
Push [ENT
WX
] to program the
memory contents.
“M”, BANK and memory num-
bers blink on the display.
Push then push [0
BANK
],
and rotate [DIAL] to select the
BANK number if desired. Push
, then push [0
BANK
] to
exit the BANK selection mode.