User Guide

6
1
PANEL DESCRIPTION
¡¡
SCRAMBLER KEY
➥ Push and hold to turn the voice scrambler func-
tion ON.
➥ Push this key to turn the voice scrambler func-
tion OFF.
NOTE:
• The optional UT-109 (#02) or UT-110 (#02)
VOICE SCRAMBLER UNIT is required.
– UT-109: Non-rolling type. 32 codes are available.
– UT-110: Rolling type. Provides higher communi-
cation security. 1020 (4 groups × 255) codes are
available.
• This transceiver requires version #02 of
these units. Do not install version #01, as
they are not compatible.
• Some PC board modifications are required
when installing UT-109 or UT-110. Please
refer to ‘Optional UT-109 or UT-110 installa-
tion’. (p.16)
• Please contact your dealer for details.
SCRM
¡¡
USER SET MODE KEY
Changes the contents of the items in the User Set
mode. Please refer to p. 10.
• Push and hold this key for 1 sec. to enter set mode.
Push this key again momentarily to select the desired
item. Push []/[]to set the desired level/condi-
tion.
Push and hold this key again to exit set mode.
• User set mode also available via the ‘Power ON func-
tion’.
SET
IC-F110_F210_GEN-1.qxd 05.6.13 1:42 PM Page 6 (1,1)