Operation Manual

ii
IMPORTANT
READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL—This in-
struction manual contains important operating instructions for
the IC-F1610 VHF TRANSCEIVER or IC-F2610 UHF
TRANSCEIVER.
EXPLICIT DEFINITIONS
Versions of the transceiver which display the “CE” on the se-
rial number seal, comply with the essential requirements of
the 89/336/EEC directive for Electromagnetic Compatibility.
RWARNING! NEVER connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
NEVER connect the transceiver to a power source of more
than 16 V DC such as a 24 V battery. This connection will ruin
the transceiver.
NEVER cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting,
the transceiver might be damaged.
NEVER place the transceiver where normal operation of
the vehicle may be hindered or where it could cause bodily
injury.
Place unit in a secure place to avoid inadvertent use by chil-
dren.
NEVER expose the transceiver to rain, snow or any liquids.
USE supplied microphones only. Other microphones have
different pin assignments and may damage the transceiver.
SmarTrunk II™ is a trademark of SmarTrunk Systems, Inc.
CAUTIONS
WORD DEFINITION
RWARNING
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
IC-F1610_F2610.qxd 03.3.7 16:29 Page ii (1,1)