User Guide

8
2
PANEL DESCRIPTION
2
‘‘
Programmable function keys
The desired key function can be assigned to [Upper] and [Lower]
in following way.
q Turn power OFF in advance.
w Rotate [CH selector] to select channel 16.
e Rotate [VOL] to turn power ON while pushing and holding the
desired key, [Upper] or [Lower], to be assigned.
• The beep is emitted depending on the selected function as below.
r Turn power OFF.
t Repeat steps e and r until the desired key function is assigned.
NULL KEY
No function.
SMART RING/RINGER KEY
➥ Push to send a Smart-Ring call.
➥ Push and hold for 1 sec. to send a Call-Ring.
MONITOR KEY
➥ Push to mute the CTCSS (or DTCS) squelch mute.
➥ Push and hold for 1 sec. to release the CTCSS (or DTCS)
squelch mute.
➥ Open any squelch/deactivate any mute while pushing and hold-
ing this key.
VOICE SCRAMBLER FUNCTION KEY
➥ Push to turn the voice scrambler function OFF.
➥ Push and hold for 1 sec. to turn the voice scrambler function ON.
[Smart Ring/Ringer]
[Moni]
[Scrambler]
[Null]
1 high beep is emitted.
2 high beeps are emitted.
3 high beeps are emitted.
1 high beep is emitted for 1 sec.
!IC-F25SR-0.qxd 06.10.5 6:31 PM Page 8 (1,1)