User Guide

18
4
RINGER FUNCTION
3
4
‘‘
Call-Ring operation
Sends the pre-selected ring tone to your group members.
DD
Select the Call-Ring melody
q Turn power OFF in advance.
w While pushing and holding [PTT]
and [Upper], rotate [VOL] to
turn power ON.
• A sample melody is emitted.
e Rotate [CH selector] to select
the ringer melody.
r Turn power OFF to determine
the melody.
DD
Call your group member with Call-Ring melody
q Set the same operating channel and CTCSS tone for all of your
group transceivers. (p. 13)
w Pushing and holding [Smart Ring/Ringer] for 1 sec. to send the
pre-selected ring tone to your group member.
• The ring tone is emitted while [Smart Ring/Ringer] is pushed and
held.
• The same ring tone comes from your group station’s speaker.
[Upper]
[VOL]
[PTT]
[CH selector]
!IC-F25SR-0.qxd 06.10.5 6:31 PM Page 18 (1,1)