User Guide

19
4
RINGER FUNCTION
‘‘
Smart-Ring operation
The ring function has an answer back feature. This allows you to
confirm whether or not a call has reached to the member of your
group even if the operator is temporarily away from the transceiver.
DD
Smart-Ring operation
q Set the same operating channel and CTCSS tone code for all of
your group transceivers. (p. 13)
w Push [Smart Ring/Ringer] to send the Smart-Ring call.
• When a member of your group station answers your call, the trans-
ceiver emits beep tones for every 10 sec.* and the LED indicator
blinks with an orange color.
*Depends on the pre-setting.
• Push [MONI] to cancel the Ringer beep and the LED blinking.
• When no answer comes back, the transceiver emits short failure
beep tones.
e Push [PTT] to answer the call and to stop the beeps and blink-
ing.
NOTE: This function is available only when the called station
has use the same CTCSS tone code and the same operat-
ing channels as you.
!IC-F25SR-0.qxd 06.10.5 6:31 PM Page 19 (1,1)