Operation Manual

7
2
PANEL DESCRIPTION
Programmable ■ key functions
Various functions can be assigned to the [Upper] and [Lower] pro-
grammable function keys.
If [Upper] or [Lower] is preprogrammed, push to activate whichever
function is set.
Consult your Icom dealer for details concerning which functions are
programmed into the key.
SCAN A
Push to start or cancel the scanning operation. ➥
When the Power ON scan function is turned ON, push to pause ➥
the scanning. The paused scan resumes after the specified time
period has passed.
SCAN B
Push to start or cancel scanning.
If the scan pauses for any reason, except being cancelled by this
key, it will resume after a specified time period has passed.
PRIORITY A CHANNEL, PRIORITY B CHANNEL
Push to select the Priority A or Priority B channel.
PRIORITY A CHANNEL (REWRITE),
PRIORITY B CHANNEL (REWRITE)
Push to select the Priority A or Priority B channel. ➥
Hold down [PRIO A (Rewrite)] or [PRIO B (Rewrite)] for 1 sec- ➥
ond to assign the operating channel to Priority A or Priority B
channel, respectively.
MEMORY CHANNEL 1, MEMORY CHANNEL 2,
MEMORY CHANNEL 3, MEMORY CHANNEL 4
Push to select memory channel 1, 2, 3 or 4, if programmed. Consult
your dealer for details.