Operation Manual

9
2
PANEL DESCRIPTION
■ LED indicator
The LED indicator indicates the status of various
parameters of the transceiver, as follows;
(Ref.; R=Red, G=Green, O=Orange)
R* R*
TX Low BATT2
R* R* R* R*
O
O O
G G G G
G G
G G G G G G G G
R G R G R G R G R G R G R G R G
R O R O R O R O R O R O R O R O
G
G G
Clone Err
Clone TX/RX
Low BATT1
Low BATT2
Busy
F/S Scan
Call LED Blink
Call LED ON
TX Low BATT1
R*
TX
•TX:LightsRedwhiletransmittingasignal.
•RX:LightsGreenwhilereceivingasignal.
•Fast/Slowscan:BlinkswhentheFast/Slowscanisactivated.
•LowBattery1:Youshouldchargethebattery.(blinksslowly)
•LowBattery2:Youmustchargethebattery.(blinksfast)
•TXlowBattery2:VeryLowBatterywasdetectedduring transmit .
•ChannelError:Anon-programmedchannelisselected.
* Lights (or blinks) orange when the optional battery case is attached.
•TXlowBattery1:LowBatterywasdetectedduringtransmit.