Operation Manual

9
SETTINGS
4
Setting the Call-Ring ringer
TheCall-Ringringersoundsonlywhentheuserholds
down [S-Ring/C-Ring] to make a call.
1) Rotate [VOL] to turn OFF the power.
2) Set [Rotary Selector] to any channel other than
Channel 16.
3) Whileholdingdown[PTT]and[Lower],rotate[VOL]
to turn ON the power and enter the Call-Ring ringer
setting mode.
 •ThecurrentCall-Ringringersounds.
4) Rotate [Rotary Selector] to select a desired Call-
Ring ringer.
 •TheselectedCall-Ringringersounds.
5) Rotate [VOL] to turn OFF the power and exit the
Call-Ring ringer setting mode.
NOTE:
TurnONtheBeepfunction(p.7)beforeyoustart
setting the Call-Ring ringer.
[Rotary Selector]
[VOL]
[Lower]
[PTT]