Operation Manual

4
SETTINGS
14
Setting the VOX gain
You can adjust the VOX gain. Higher values make the
VOX function more sensitive to the user voice.
1) Rotate [VOL] to turn OFF the transceiver power.
2) Set [Rotary Selector] to Channel 16.
3) Whileholdingdown[PTT]and[Upper],rotate
[VOL] to turn ON the power and enter the VOX
GainAdjustmentmode.
 •Anopeningbeepsoundsand “Sixteen” willbe
announced.
4) Push [Upper] to increase, or push [Lower] to
decrease the VOX gain.
 •Abeepsoundsafterpushing[Upper]or[Lower].
5) Rotate [VOL] to turn OFF the power and exit the
VOXGainAdjustmentmode.
[Rotary Selector]
[VOL]
[Lower]
[Upper]
[PTT]
NOTE:
•Theadjustablerangeis1(minimum)to10
(maximum).
•Abeepsoundsafterpushing[Upper]or[Lower].
Anerrorbeepsoundsifyoutrytoexceedthe
adjustablerange.
NOTE:
TurnONtheBeepfunction(p.7)beforeyoustart
setting the VOX gain.