Operation Manual

6
OTHER FUNCTIONS
20
Tone Scan function
This function is effective when the user wants to
communicatewithanotherstationbutdoesnotknow
its CTCSS tone or DTCS code setting.*
*Dependingonthepresetting.Askyourdealerfor
details.
1) Rotate [VOL] to turn OFF the power.
2) Set [Rotary Selector] to any channel other than
Channel 16.
3) While holding down [Upper] and [Lower], rotate
[VOL] to turn ON the power and enter the Tone
Scan mode.
 •Anopeningbeepsoundsandthecurrentchannel
numberwillbeannounced.(Example:Ten)
4) Rotate [Rotary Selector] to select a desired channel
that you want to assign the detected CTCSS tone
or DTCS code to.
 •Theselectedchannelnumberwillbeannounced.
5) Hold down [Upper] for 1 second to start a scan.
 •TheLEDindicatorblinksgreenslowly.
6) When detecting a matching tone or code, the scan
pauses, and the tone or code is automatically set to
the channel.
7) Push [Upper] to cancel the scan.
8) Rotate[VOL]toturnOFFthepowerandexitthe
Tone Scan mode.
[Rotary Selector]
[VOL]
[Lower]
[Upper]
NOTE:
TurnONtheBeepfunction(p.7)beforeyou
enter the Tone Scan mode.
NOTE:
The scan resumes 3 seconds (default) after the signal
disappears.