Operation Manual

3
Section 2
PROGRAMMABLE KEY FUNCTIONS
Programmable key functions
You can assign the functions described below to [Top],
[Upper], and [Lower] by using the CS-F29DR cloning
software (purchase separately).
Ask your dealer for details.
Null
➥ No function is assigned.
ZONE
➥ Push to toggle the operating Zone.
 •Eachtimetheuserpushesthiskey,thetransceiver
selects Zone 1, Zone 2, and then Zone 1 again.
SCAN
➥ Push to start or pause a scan.
 •WhenascanisstartedwiththePowerONScanorthe
Automatic scan function, push this key to pause the
scan. The paused scan resumes after a set time period.
➥ Hold down this key while a scan is paused, and
then the channel is removed from the scan group.
 •Theremovedchannelisautomaticallyaddedtothe
scan group again, after the scan is canceled.
MONI
➥ While holding down this key, the C.Tone* mute
is released, even if the received signal does not
include a matching C.Tone*.
* CTCSS tone or DTCS code
LOCK
➥ Hold down to turn the Key Lock function ON or
OFF.
 •EvenwhentheKeyLockfunctionisON,[PTT],[MONI],
[LOCK], [CALL], [CLEAR], [SURVEILLANCE], and
[SIREN] are not locked.
CALL // only on a Digital channel //
➥ Push to make a call that includes a Common ID.
CLEAR // only on a Digital channel //
➥ Pushtonishacommunicationbysendingaclear
down signal. After the other station receives the
clear down signal, the transceiver automatically
enters to the Stand-by mode.
BREAK // only on a Digital channel //
➥ Hold down to send a Break-in request call.
 •TheBreak-inrequestcallannouncestotheother
stations on the channel that the user wants to break into
the current communication in the group. The transceiver
waits for the current communication to end. After the
communication ends, the transceiver automatically
sends the call.
➥ While waiting, push this key to cancel the Break-in
request call.
S-RING/C-RING
// only on an Analog channel //
➥ Push to make a Smart-Ring call.
// on both an Analog and a Digital channel //
➥ Hold down to make a Call-Ring call.
NOTE: See the instruction manual that comes with
the transceiver for the default settings of these keys.
[Rotary Selector]
[VOL]
[Lower]
[Upper]
[PTT]
[Top]
NOTE:
Select the channels to be scanned by using
CS-F29DR cloning software.