Operation Manual
Table Of Contents
17
3
BASIC OPERATION
■ Emergency transmission
When[Emergency]ispushedforthespeciedtimeperiod*,
the emergency signal is transmitted once, or repeatedly, on
the specified emergency channel.
A repeat emergency signal is automatically transmitted until
the transceiver receives an acknowledgement signal, or you
turn the transceiver power OFF.
When no emergency channel is specified, the signal is trans-
mitted on the
operating
channel.
If you want to cancel the emergency call, push and hold
[Emergency] again before transmitting the call.
If your transceiver is programmed for Silent operation, you
can transmit an Emergency call without the beep sounding
and the LED indicator lighting.
IMPORTANT: It is recommended to set an emergency
channel individually to provide the certain emergency call
operation.
*
Depending on the presetting. Ask your dealer for details.
D NOTES
Depending on the presetting, the following functions are auto-
matically activated. Ask your dealer for details.
• Auto TX function
After the emergency call transmission, audio from the micro-
phone is automatically transmitted for a specified time pe-
riod.*
• Auto RX function
After the emergency call transmission, the transceiver stands
byintheaudiblemodeforthespeciedtimeperiod.*