Operation Manual

18
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Automatic Key Lock function
When [Lock] is assigned to any key and the Automatic Key Lock
timerispre-programmed*byyourdealer,thekeylockfunction
can be automatically turned ON after the specified time period
has passed without operation during standby condition.
While the lock function is ON, push and hold [Lock] for 1 sec.
to turn the function OFF.
*When“0”isprogrammed,thisfunctionisnotavailable.
■ Priority A channel selection
When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.
•TurningthepowerON
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
•Statuscall
The Priority A channel is selected when transmitting a
status call. (BIIS operation only)
•Cleardown
The Priority A channel is selected after the clear down
signal is transmitted.