Operation Manual

29
7
OPTIONS
VOX gain and delay adjustment
q Attach the connector of the VS-1SC into the multi-connec-
tor on the transceiver and tighten the screw.
 •ToggletheVOX/PTTselectswitchto[VOX].
w Hold down [User Set Mode] for 1 second to enter the user
set mode.
e Push [User Set Mode] one or more times to select the
“VOX Gain” or “VOX Delay” items. Then, push [CH Up] or
[CH Down] to set the desired level/condition.
r Hold down [User Set Mode] for 1 second again to exit the
user set mode.
• VOX Gain
The VOX sensitivity level can be adjusted from OFF or 1 to 6
(more sensitive).
VOX function is OFF
X
TXC
SET
CALA SET TXCU TXC CALA SET TXCU TXC
VOX OFF VOX GAIN 3
VOX gain level 3
(default)
X
TXC
SET
[Side2]
Push
[Side3]
• VOX Delay
The VOX delay time can be set from 0.5 to 3.0 sec. (0.5 sec.
step) for a convenient interval before returning to receive.
0.5 sec (min.)
(default)
X
TXC
SET
CALA SET TXCU TXC CALA SET TXCU TXC
VOX DLY0.5 VOX DLY3.0
3.0 sec (max.)
X
TXC
SET
[Side2]
Push
[Side3]
NOTE: MIC/VOX gain can be adjusted via the Adjusting
pot using a thin screw driver.