Operation Manual

10
2
PANEL DESCRIPTION
TX CODE CHANNEL SELECT KEY “TXC”
Push to enter the TX code channel selection mode. Then
set the desired channel using [CH Up] or [CH Down].
(pp. 14, 15)
TX CODE CHANNEL UP/DOWN KEYS “TXCU” “TXCD”
Push to select a TX code channel directly.
ID-MEMORY SELECT KEY “IDMS”
➥ Recalls detected ID codes.
• Push this key, then select the ID code using [CH Up] or [CH
Down].
• Up to ve ID’s can be memorized.
➥ Hold down for 1 second to erase the selected ID’s.
SCRAMBLER/ENCRYPTION KEY “SCR”
➥ While in the analog mode operation, push to toggle the
voice scrambler function ON or OFF.
➥ While in the digital mode operation, push to toggle the
encryption transmission function ON or OFF.
COMPANDER KEY “COMP”
Push to toggle the compander function ON or OFF.
The compander function reduces noise components from the
transmitting audio to provide clear communication.
USER SET MODE KEY “SET”
➥ Hold down for 1 second to enter the User set mode.
• While in the User set mode, push this key to select an item, and
change the value or condition using [CH Up] or [CH Down].
➥ Hold down this key for 1 second again to exit the User set
mode.
OPT OUT KEYS “OP1” “OP2” “OP3”
Push to control the output signal level from the optional unit
connector.
OPT MOMENTARY KEYS “O1M” “O2M” “O3M”
Push to control the output signal level from the optional unit
connector.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16