Operation Manual

4
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Front panel ■
w
e
t
r
y
q
!1
!0
o
!2
u
i
Microphone
Speaker
GPS receiver*
*A GPS receiver is
built-in, depending on
the transceiver version.
q ROTARY SELECTOR
Rotate to select the memory channels or the operating
zone, depending on the presetting.
w ANTENNA CONNECTOR
 Connect the supplied antenna. (p. 1)
e DEALER-PROGRAMMABLE KEY [EMR]
Desired functions can be preset by your dealer.
(p. 6)
r DEALER-PROGRAMMABLE KEY [Side1]
Desired functions can be preset by your dealer.
(p. 6)
t PTT SWITCH [PTT]
 Hold down to transmit, release to receive.
y DEALER-PROGRAMMABLE KEYS [Side2]/[Side3]
Desired functions can be preset by your dealer. (p. 6)
u 10-KEYPAD (Depending on the version)
The keypad allows you to enter digits to:
• Select memory channels
• Select tone channels
• Select DTMF codes (during transmit)
• Set TX codes
• Start up with the password
i DEALER-PROGRAMMABLE KEYS [P0] to [P3]
Desired functions can be preset by your dealer. (p. 6)
o FUNCTION DISPLAY (p. 5)
Displays a variety of information such as an operating
channel number/name, Set mode contents, DTMF code,
selected functions and so on.