Operation Manual

7
NXDN™ OPERATION
7-4
Transmitting a call (Continued)
D Transmitting a Group call
You can call a specied group.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > Signaling/Call > Call List Select)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Call List Select,”
then push [OK].
4. Push [Up] or [Down] to select the Group ID.
5. Push [PTT] to transmit a Group call.
6. Hold down [PTT] and speak at your normal voice
level. Release [PTT] to receive.
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
Using [Call List Select]:
1. Push [Call List Select] to display the “Call List
Select” screen.
2. Push [Up] or [Down] to select the Group ID.
3. Push [PTT] to transmit a Group call.
4. Hold down [PTT] and speak at your normal voice
level. Release [PTT] to receive.
Using [Group]:
1. Push [Group] to display the “Group Select”
screen.
2. Push [Up] or [Down] to select the Group ID.
3. Push [PTT] to transmit a Group call.
4. Hold down [PTT] and speak at your normal voice
level. Release [PTT] to receive.
TIP: You can display the “Group Select” screen
through the Menu screen.
(Menu > Signaling/Call > Group Select)
Previous view