Operation Manual

2
PANEL DESCRIPTION
ZONE KEY “ZONE”
Push this key, then push [CH Up] or [CH Down] to select the
desired zone. When [Rotary selector] selects the “operating
zone,” this key operation is disabled.
What is a “zone”?— Selected channels are assigned to a
zone according to how they are to be used in a group. For
example, ‘Staff A’ and ‘Staff B’ are assigned to a “Busi-
ness” zone, and ‘John’ and ‘Cindy’ are assigned to a “Pri-
vate” zone.
ZONE UP AND DOWN KEYS “ZNUP” “ZNDN”
Push to select an operating zone. When [Rotary selector] se-
lects an “operating zone,” these keys are disabled.
SCAN KEY “SCAN”
➥ Push to start or cancel a scan.
• When the Power ON Scan function is activated, push to pause
the scan. The paused scan resumes after the specified time pe-
riod has passed.
➥ Hold down this key for 1 second to display the scan group,
then push [CH Up] or [CH Down] to select the desired
group.
SCAN ADD/DEL (TAG) KEY “SCAD”
➥ Push to add a channel to, or delete it from the current scan
group.
1. Push to display the scan group, then push [CH Up] or
[CH Down] to select the desired group.
2. Push to add a channel to, or delete it from the selected
group.
3. Hold down for 1 second to exit the scan group selection
mode.
➥ While a scan is paused on a non-priority channel, push
this key to delete the selected channel from the scan
group.
Depending on the presetting, the cleared channel may
be added to the scan group again after the scan is can-
celled. (Nuisance Delete function)
PRIORITY CHANNEL KEYS “PRA” “PRB”
➥ Push to select the Priority A or Priority B channel.
PRIORITY CHANNEL (REWRITE) KEYS “PRAR” “PRBR”
➥ Push to select the Priority A or Priority B channel.
➥ Hold down [Prio A (Rewrite)] or [Prio B (Rewrite)] for
1 second to rewrite the Priority A or Priority B channel as
the operating channel.
7