Operation Manual

BASIC OPERATION

Transmitting notes D

• Transmit inhibit function

The transceiver has several inhibit functions which restrict

transmission under the following conditions:

- The channel is muted (‘Inaudible’ mode;

“

” (Audible icon)

does not appear.)

- The channel is busy.

- Unmatched or matched CTCSS is received, depending on

the presetting.

- The selected channel is a ‘receive only’ channel.

• Time-out timer

After continuous transmission for a preset time period, the

time-out timer causes the transceiver to stop transmitting.

• Penalty timer

Once transmission is cut OFF, it is further inhibited for a

period determined by the Penalty timer.

TX code channel selection D

If the transceiver has [TX Code CH Select] assigned to it,

the display can be toggled between the operating channel

number or name, and the TX code channel number or name.

When the TX code channel number, or name is displayed,

pushing [CH Up] or [CH Down] selects the TX code channel.

USING [TX CODE CH SELECT] KEY:

q Push [TX Code CH Select]— a TX code channel number

or name appears.

w Push [CH Up] or [CH Down] to select the desired TX code

channel.

e After selecting, push [TX Code CH Select] to set the

code.

• Return to the standby mode.

r Push [Call] to transmit the selected TX code.

USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:

If the transceiver has a [TX Code CH Up] or [TX Code CH

Down] key assigned, the preset TX code channel can be di-

rectly selected when pushed.

☞ Continued on the next page