Operation Manual

2
PANEL DESCRIPTION
2-11
Category: Signaling/Call
Call
In the Analog mode
Push to make a call to the preset destination in the
channel�
Call A/Call B
In the Analog mode
Push to transmit a preset 2/5-Tone code or BIIS Call
Setup to the preset destination�
In the Digital mode
Push to transmit a Call Setup to the preset
destination�
Re-dial
Push to send the last transmitted DTMF code number�
L Redial will be cleared when the transceiver is turned OFF
once�
Call List Select
1� Push to display the “Call List” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select an ID
name (or ID code)�
3� After selecting, push [OK] to set, and return to the
Standby mode�
Call Menu
1� Push to display the “Call Menu” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select an ID
name (or ID code)�
3� After selecting, push [OK] to set, and display the
call function screen�
4� Push [P1 (Down)] or [P2 (Up)] to select a call
function�
L See ‘Transmitting a call’ on Sections 7 and 8 for
details�
5� After selecting, push [PTT] to make a call to the
selected station or group�
DTMF Autodial
z Push to display the “DTMF Autodial” screen� Then,
push [P1 (Down)] or [P2 (Up)] to select a DTMF
code� After selecting, push [PTT] to transmit the
selected DTMF code�
z While in the Standby mode, hold down for 1 second
to transmit the currently selected DTMF code�
Emergency
1� Hold down during the Emer SW ON Timer period
to enter the Emergency mode�
2� After the Reminder Timer period has passed, an
Emergency call is automatically transmitted once,
or repeatedly�
NOTE:
• Set the related settings using the programming
software�
• This key function is assignable to only [Emer] or
[Ext� Emer]�
L Hold down during the Emer SW OFF Timer
period to cancel the Emergency function, before
transmitting an Emergency call�
Telephone
In the Digital mode (dPMR™ Trunking only)
1� Push to display the “Phone List” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select a phone
number�
3� Push [OK] to connect to the telephone network�
Individual
1� Push to display the “Individual ID” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select an
Individual ID name (or ID code)�
3� Push [OK] to set�
Group
1� Push to display the “Group ID” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select an Group
ID name (or ID code)�
3� Push [OK] to set�
Status
1� Push to display the “Status List” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select a Status
message�
3� Push [PTT] to send the message to the currently
selected station or group, or push [OK] to set�
L See pages 7-5 and 8-4 for details�
Message
1� While in the Standby mode, push to display the
“Message List” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select a
message�
3� Push [PTT] to send the message to the currently
selected station or group�
L See pages 7-6 and 8-5 for details�
Write Message
1� Push to display the “Write Message” screen�
2� Write a message�
3� Push [PTT] to send the message to the currently
selected station or group�
L See pages 7-7 and 8-6 for details�
Assignable Software key functions
Previous view