Operation Manual

6
MENU SCREEN
6-5
Signaling/Call
Status
Displays the “Status” screen� The preset Status messages are selectable�
p� 6-9
Telephone
Enables the user to connect to a telephone network�
p� 6-9
Write Message
Enables the user to directly enter a message�
p� 6-9
Trunking
Acquisition
Selects a number for the Control CH Acquisition Parameter�
p� 6-10
Call Back
Turns the Call Back function ON or OFF�
p� 6-10
Retention
Selects a number for the Control CH Retention Parameter�
p� 6-10
Roaming Reqst
(Roaming Request)
Turns the Roaming Request function ON or OFF�
p� 6-10
Site Select
Selects a site�
p� 6-10
Site Lock
Turns the Site Lock function ON or OFF�
p� 6-10
Functions
Lone Worker
Turns the Lone Worker function ON or OFF�
p� 6-10
Surveillance
Turns the Surveillance function ON or OFF�
p� 6-10
VOX
Turns the VOX function ON or OFF�
p� 6-10
VOX Delay
Sets the VOX Delay�
p� 6-10
VOX Gain
Sets the VOX gain�
p� 6-10
GPS
GPS Position My Position
Displays the transceiver’s current location�
p� 6-11
RX List
Displays the received call that includes location data�
p� 6-11
Voice Rec
(Voice Recording)
Call Recorder
Turns the audio recording function ON or OFF�
p� 6-11
Play Call Rec
(Play Call Record)
Enables the user to play back the recorded audio�
p� 6-11
Audio Setting
AF Max Level
(AF Maximum Level)
Sets the maximum audio output level�
p� 6-12
AF Min Level
(AF Minimum Level)
Sets the minimum audio output level�
p� 6-12
Mic Gain
(Microphone Gain)
Sets the microphone sensitivity�
p� 6-12
R Noise Cancel
(RX Noise Cancel)
Selects whether or not to suppress the receive audio noise to make the audio easy to hear�
p� 6-12
T Noise Cancel
(TX Noise Cancel)
Selects whether or not to suppress the microphone input noise to make the audio easy to hear�
p� 6-12
RX EQ Effect
(RX Equalizer Effect)
Selects the RX Equalizer Effect�
p� 6-12
TX EQ Effect
(TX Equalizer Effect)
Selects the TX Equalizer Effect�
p� 6-12
► Continued on the next page
Menu items
Previous view