Operation Manual

6
MENU SCREEN
6-13
Bluetooth
Turns the Bluetooth function ON or OFF�
• OFF: Turns OFF the function�
• ON: Turns ON the function�
Bluetooth Reset
Resets the Bluetooth unit�
Resetting can be done only when the Bluetooth
function is OFF�
Auto Connect
Select whether or not to automatically connect to a
paired Bluetooth device when its power is turned ON�
• OFF: Does not connect to a paired device�
• ON: Automatically connects to the last connected
device�
NOTE: If the last connection is operated with the
Bluetooth device, the transceiver tries to connect to
the device even if this item is set to OFF�
Audio Select
Selects the AF Output device when a Bluetooth
headset is connected�
• Only RMT: Sets the Bluetooth headset as the AF
Output device�
• RMT & SP: Sets the Bluetooth headset and the
transceiver’s speaker as the AF
Output devices�
Bluetooth info
Displays the installed Bluetooth unit name, address,
supported prole, and its version information.
Device List
Displays the paired Bluetooth devices�
To nd other Bluetooth device, select “Find Device.”
L See pages 10-4 ~10-5 for details�
Key Bp (VS3)
Sets the beep sound when the optional VS-3
Bluetooth
®
headset Custom Key ([PLAY]/[FWD]/
[RWD]) is pushed�
• OFF: No beep sounds�
• ON: A beep sounds�
PWR Sv (VS3)
Selects whether to operate in the Bluetooth headset’s
Battery Saving mode when the optional VS-3
Bluetooth
®
headset is connected� When the Power
Save is activated, the user cannot use the VOX
function�
NOTE: When a third-party headset or a data device
is connected, this function is automatically set to
OFF, even if this item has been set to ON�
• OFF: Turns OFF the function�
• ON: The Power Save mode is enabled when no
communication or operation is performed for
120 seconds�
PTT Bp (VS3)
Sets the beep sound when [PTT] is pushed on the
optional VS-3 Bluetooth
®
headset�
• OFF: No beep sounds�
• ON: A beep sounds�
1 Touch PTT
Sets the One-Touch PTT function when the Bluetooth
headset is connected� The function enables a user to
transmit without continuously holding down [PTT]�
NOTE: When a third-party headset is connected, this
function may automatically be set to ON, even if this
item has been set to OFF�
• OFF: Push [PTT] to transmit, release to receive�
• ON: Push [PTT] to transmit, push again to receive�
Wait to Pair
Enters the pairing request wait mode� The transceiver
waits for a pairing request from a Bluetooth device�
Bluetooth
Previous view