Operation Manual

dPMR™ OPERATION

7-3

D Transmitting an Individual call

(Menu > Signaling/Call > Call List Select)

1� Push [Menu] to display the Menu screen�

2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/

Call,” then

push [OK]�

Channel/Scan ►

Signaling/Call ►

3� Push [P2 (Up)] or [P1 (Down)] to select “Call List

Select,” then

push [OK]�

Call List Select ►

Call Menu ►

Signaling/Call

4� Push [P2 (Up)] or [P1 (Down)] to select an

Individual station�

✔ Station 1

✔ Group 1

Call List Select

5� Push [PTT] to transmit an Individual call�

6� Hold down [PTT] to transmit�

7� Release [PTT] to receive�

8� After the communication is nished, push [Back].

• The transceiver sends a Disconnect signal to

terminate the call�

L Either station can send a Disconnect signal�

Transmitting a call

TIP:

• You can also select an Individual station in the

“Individual Select” screen�

(Menu > Signaling/Call > INDIV Select)

• You can also transmit an Individual call through the

Call Menu�

(Menu > Signaling/Call > Call menu)

• When an Individual ID is set in the Memory CH,

you can transmit an Individual call by pushing [PTT]

on the channel�

• Push [Call List Select] to directly display the “Call

List Select” screen in step 4 to the left�

Previous view