Operation Manual

dPMR™ OPERATION

7-8

D Transmitting an Ambience Listening call

An Ambience Listening call enables you to send a

command that will require the target station to transmit

its microphone audio�

NOTE: This function is enabled only when the same

status number is set between stations�

(Menu > Signaling/Call > Call Menu)

1� Push [Menu] to display the Menu screen�

2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/

Call,” then

push [OK]�

Channel/Scan ►

Signaling/Call ►

3� Push [P2 (Up)] or [P1 (Down)] to select “Call

Menu,” then

push [OK]�

Call List Select ►

Call Menu ►

Signaling/Call

4� Push [P2 (Up)] or [P1 (Down)] to select the

Individual ID, then push [OK]�

✔ Station 1 ►

✔ Station 3 ►

Call Menu

5� Push [P2 (Up)] or [P1 (Down)] to select “Ambience

Listening,” then push [PTT] to transmit the

Ambience Listening call�

✔ Write Message ►

✔ Ambience Listening

Station 1

• The target station transmits the microphone audio�

• “

” is displayed and the target station’s microphone audio

is heard for the preset period of time�

• “

” may be displayed or blink, depending on the

presetting�

L “Success” is displayed after receiving an

acknowledgement from the target station�

L “Failed” is displayed if the target station does not send

back an acknowledgement and the microphone audio�

TIP: Hold down [Ambience Listening] for 1 second to

transmit an Ambience Listening call�

Transmitting a call

Previous view