Operation Manual

dPMR™ OPERATION

7-14

You can manually select a number for the Control CH

Acquisition Parameter� The Acquisition Parameter

determines whether a site is out of the service range

or not�

TIP: The Control CH Acquisition Parameter is

programmed using the programming software� See

the softwareʼs Help le for details.

(Menu > Trunking > Acquisition)

1� Push [Menu] to display the Menu screen�

2� Push [P2 (Up)] or [P1 (Down)] to select “Trunking,”

then

push [OK]�

Signaling/Call ►

Trunking ►

3� Push [P2 (Up)] or [P1 (Down)] to select

“Acquisition,” then

push [OK]�

Acquisition ►

Call back ►

Trunking

4� Push [P2 (Up)] or [P1 (Down)] to select the

desired Acquisition Parameter number, then push

[OK]�

✔ 1 ►

✔ 2 ►

Acquisition

5�

Hold down [Back] for 1 second to return to the

standby screen�

Selecting the Acquisition Parameter (For the Trunking operation)

Previous view