Operation Manual

7
dPMR™ OPERATION
7-17
You can lock the transceiver to the currently registered
Site� When this function is ON, the transceiver cancels
resuming a Roaming scan, and stays on the current
Site, regardless of the error rate�
L “ ” is displayed when this function is turned ON�
(Menu > Trunking > Site Lock)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Trunking,”
then push [OK]�
Signaling/Call ►
Trunking ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Site
Lock,” then push [OK]�
Roaming Reqst ►
Site Lock ►
Trunking
4� Push [P2 (Up)] or [P1 (Down)] to select “ON,” then
push [OK] to turn on the Site Lock function�
✔ OFF ►
✔ON
Site Lock

Site Lock
ON
5� Hold down [Back] for 1 second to return to the
standby screen�
Site Lock function (For the Trunking operation)
TIP: Hold down [Site Lock] for 1 second to turn the
Site Lock function ON or OFF�
Site Lock
ON

Trunk 1
Site Lock Backlight
Previous view